Universal RF adapter: RF connection allows you cell phone to achieve
far greater signal, reducing dropped calls!
All cell phone models: Use any cell phone up to 2.5 inches wide, and
simply place the cell phone into the cradle/ holder. Squeeze the sides to
cushion and hold the cell phone against the internal RF inductance unit. Push a
button to release the cell phone.
Hands Free audio required: Since the cell phone must remain in the
cradle to achieve better radio signal and reduce dropped calls, Audio must be
achieved with an optional headset/ speaker phone. If you cell phone uses a
cabled headset, be sure it attaches at the open bottom or top connector, as the
side ports are often blocked by the cushioned cradle/ holder.
Wilson model 301146 operates at both cellular radio frequency bands of 824-894
MHz and 1850-1990 MHz. (Not iDen/ Nextel radio frequencies)
Antenna connector: The FME female connector on the cradle
requires an FME Male connector from the optional
Wilson 811210 amplifier or optional antenna you wish to connect.
Mounting options: Air vent, adhesive, and screw swivel mounting