Qty:

Car Holder for SAMSUNG A127

• Universal RF adapter: RF connection allows you cell phone to achieve far greater signal, reducing dropped calls!
• All cell phone models: Use any cell phone up to 2.5 inches wide, and simply place the cell phone into the cradle/ holder. Squeeze the sides to cushion and hold the cell phone against the internal RF inductance unit. Push a button to release the cell phone.
• Hands Free audio required: Since the cell phone must remain in the cradle to achieve better radio signal and reduce dropped calls, Audio must be achieved with an optional headset/ speaker phone. If you cell phone uses a cabled headset, be sure it attaches at the open bottom or top connector, as the side ports are often blocked by the cushioned cradle/ holder.
• Wilson model 301146 operates at both cellular radio frequency bands of 824-894 MHz and 1850-1990 MHz. (Not iDen/ Nextel radio frequencies)
• Antenna connector: The FME female connector on the cradle requires an FME Male connector from the optional Wilson 811210 amplifier or optional antenna you wish to connect.
• Mounting options: Air vent, adhesive, and screw swivel mounting brackets included.